HP 316095-B21 - StorageWorks Edge Switch 2/24 Nota de publicación - Página 5

Navegue en línea o descargue pdf Nota de publicación para Interruptor HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 18 páginas. Edge switch release notes
También para HP 316095-B21 - StorageWorks Edge Switch 2/24: Manual de actualización (9 páginas), Manual (41 páginas), Manual (40 páginas), Nota de publicación (32 páginas), Nota de publicación (27 páginas), Manual (26 páginas), Nota de publicación (27 páginas), Nota de publicación (25 páginas), Manual de instrucciones de instalación (24 páginas), Nota de publicación (23 páginas), Nota de publicación (23 páginas), Nota de publicación (22 páginas), Nota de publicación (23 páginas), Nota de publicación (19 páginas), Nota de publicación (19 páginas), Manual de instrucciones (17 páginas), Nota de publicación (17 páginas), Instrucciones de actualización (16 páginas), Manual de instrucciones (16 páginas), Manual de instrucciones de instalación (16 páginas), Nota de publicación (16 páginas), Nota de publicación (17 páginas), Nota de publicación (17 páginas), Nota de publicación (11 páginas)

Imprimir página
HP 316095-B21 - StorageWorks Edge Switch 2/24 Nota de publicación
Consider the impact of the following limits when planning the fabric:
•
Fabric elements—Each fabric element is defined by a unique domain ID that ranges between
1 and 31; therefore, the theoretical limit of interconnected Directors in a single fabric is 31.
The supported limit of interconnected switches in a single fabric is 24. Because this number is
subject to change, contact your HP-authorized service representative for the current number of
interconnected switches supported in a single fabric.
•
Inhomogeneous fabric—To determine if interoperability is supported for a product, or if restrictions
apply, see the product publications or contact your HP-authorized service representative.
•
Number of interswitch links (ISLs)—The maximum supported number of ISLs is 75% of installed
ports for the Director 2/64, and 100% of installed ports for the Director 2/140. The maximum
supported number of ISLs for Edge Switches is all available switch ports. For redundancy, at least
two ISLs should connect any two Edge Switch or Director-class fabric elements. Because this
number is subject to change, contact your HP-authorized service representative for the current
number of ISLs supported for each Director or Edge Switch.
•
Hop count—The Fibre Channel theoretical limit of ISL connections traversed (hop count) in a
single path through a fabric is seven. The maximum supported hop count in a single path through
a fabric is three. Because this number is subject to change, contact your HP-authorized service
representative for the current hop count supported by a single fabric path.
The hop count is equal to the number of ISL connections traversed in a single path, not the total
number of ISL connections between devices.

Cable requirements

Consider the following switch cable requirements.
NOTE:
Optical cables for Director and Edge Switch products must be ordered separately.
•
For cables measuring up to 500 meters (1 Gb/s) or 300 meters (2 Gb/s), use multimode Fibre
Channel cables. For longer cables, use single-mode Fibre Channel cables.
•
Multimode optical cables are connected to short-wave optical transceiver modules in a switch.
Single-mode optical cables are connected to long-wave optical transceiver modules in a switch.
Multimode cables should use 50/125 optical fibers, and single-mode cables typically use 9/125
optical fibers for distances up to 10 km.
•
Verify that connectors interfacing with the Director or Edge Switch products use LC duplex
connectors with a PC finish. In addition, the connector at the opposite end of the cable must be of
either LC or SC type, depending on the requirements of the connected device.

Operating systems

For a list of supported operating systems, see
switches.html.
Languages
English
http://h18006.www1.hp.com/storage/saninfrastructure/
Director and Edge Switch release notes
5