HP 316095-B21 - StorageWorks Edge Switch 2/24 Nota de publicación - Página 7

Navegue en línea o descargue pdf Nota de publicación para Interruptor HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 18 páginas. Edge switch release notes
También para HP 316095-B21 - StorageWorks Edge Switch 2/24: Manual de actualización (9 páginas), Manual (41 páginas), Manual (40 páginas), Nota de publicación (32 páginas), Nota de publicación (27 páginas), Manual (26 páginas), Nota de publicación (27 páginas), Nota de publicación (25 páginas), Manual de instrucciones de instalación (24 páginas), Nota de publicación (23 páginas), Nota de publicación (23 páginas), Nota de publicación (22 páginas), Nota de publicación (23 páginas), Nota de publicación (19 páginas), Nota de publicación (19 páginas), Manual de instrucciones (17 páginas), Nota de publicación (17 páginas), Instrucciones de actualización (16 páginas), Manual de instrucciones (16 páginas), Manual de instrucciones de instalación (16 páginas), Nota de publicación (16 páginas), Nota de publicación (17 páginas), Nota de publicación (17 páginas), Nota de publicación (11 páginas)

Imprimir página
HP 316095-B21 - StorageWorks Edge Switch 2/24 Nota de publicación
Description
CTP fails with 41 1 01 53 22 continuously until unit was
IML'ed.
Fault 01A029 occurs.
Flow assigned internally to a backend port on a QPM
is rerouted to newly configured preferred exit port
without waiting for rerouting delay. This has potential to
cause out-of-order frames and the impact/recovery is
dependent on the end node.
Preferdomain ID is not updated automatically when
EFM or fabric binding are enabled and switch is in
online state.
warmStart and coldStart traps are not always
received across ethernet switches.
Audit log time sync shows incorrect date; for example,
01/04/46.
Restore configuration is not completed successfully when
the backup swconfig contains 2047 zones.
RADIUS server properties in Security>RADIUS Server
page using Netscape as browser.
Port state information is not updated in HAFM Basic
when an unresponsive node becomes active. The port
still reports Invalid Attachment even though the
port is active and traffic is flowing across the link.
Enhancements
This section describes enhancements for the firmware 09.00.00 release.
4Gb Fibre Channel speed support for Director 2/140
This release now provides 4-Gb Fibre Channel speed support in the Director 2/140 (Intrepid 6140
Director) only.
Operation at 4–Gb is provided with the use of the quad port module (QPM) in the Director.
For more information about QPM, see the latest versions of the McDATA Intrepid 6140 and 6064
Directors Element Manager User Manual and the McDATA E/OS Command Line Interface User Manual,
available on the McDATA web site
indexForSearchBy.jsp?searchFolderName=/tpub/&resourceType=Technical%20Documents&prod-
uct_line_root=tpub&resource=tpub_search&mcdata_category=www_resource.
PFE feature bundling and trial PFE key support
This release now supports product feature enablement (PFE) feature bundling and trial PFE key support.
Trial PFE keys let you try features for a predetermined amount of time, after which the features are disabled.
For information about all PFE features, contact your authorized McDATA reseller. You can find the
latest McDATA contact information by region on the web site
index.html.
Affected models
Director 2/64 (Intrepid 6040 Director)
Director 2/64 (Intrepid 6040 Director)
Director 2/140 (Intrepid 6140 Director)
Firmware family
Director 2/140 (Intrepid 6140 Director)
Edge Switch 2/16 (Sphereon 3216)
Edge Switch 2/12 (Sphereon 4300)
Firmware family
Edge Switch 2/16 (Sphereon 4500)
EOS Family
EOS Family
http://www.mcdata.com/wwwapp/resourcelibrary/jsp/navpages/
http://www.mcdata.com/about/contact/
Director and Edge Switch release notes
7