HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter Nota de publicación - Página 5

Navegue en línea o descargue pdf Nota de publicación para Interruptor HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter. HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter 5 páginas. Storageworks modular smart array controller, cache, and battery replacement instructions
También para HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter: Manual de referencia (48 páginas), Manual de administración (40 páginas), Nota de publicación (13 páginas), Instrucciones de inicio rápido (8 páginas), Nota de publicación (8 páginas), Nota de publicación (8 páginas), Manual de inicio rápido (7 páginas), Instrucciones de sustitución (4 páginas)

Imprimir página
HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter Nota de publicación
3.
Go to the Windows Task Manager and end the hpmsafcvds task. (Right click the Windows
Taskbar, and select Task Manager. Click the Processes tab, click the hpmsafcvds task, click
End Process, and close the Task Manager.)
4.
Restart the client application.
•
The delete lun command is supported, but only the last logical drive of an array can be
deleted. VDS does not recognize the concept of arrays, so it is not readily apparent which
LUN can be deleted.
•
The hardware provider does not allow simultaneous extension of size with a list of disks. For
example the following command is invalid: extend lun drives=5,6 size=111mb. Use
only one option at a time. Also, the hardware provider will not automatically extend a LUN to its
maximum size when specifying a drive list.
•
The only Automagic set parameters supported are FTL, MXD, and STS. When using the
STS parameter, you must select one of the available stripe sizes. To list stripe sizes, use the
detail subsytem command.
•
The maintenance command supports only blinking. Other maintenance options are not
supported, such as SPINUP, SPINDOWN, BEEP, and PING.
•
The HP MSA FC VDS hardware provider supports HP MPIO Full-Featured DSM for MSA
Active-Active configurations. For MSA Active-Passive configurations, the HP MSA FC VDS
hardware provider supports only HP MPIO Basic DSM, and you must use MPIO management
software to manage MPIO.
Determining current version
To determine your current version of HP MSA HWP software:
1.
Select Windows Start > Settings > Control Panel, and select Add or Remove Programs.
2.
Click HP VDS.
3.
Click Support Information.
Supersedes history
None
Effective date
February 2007
HP StorageWorks Modular Smart Array FC VDS Hardware Provider for Windows 2003 release notes
5