HP StorageWorks 2/32 - SAN Switch Manual de instrucciones de instalación - Página 5

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Interruptor HP StorageWorks 2/32 - SAN Switch. HP StorageWorks 2/32 - SAN Switch 6 páginas. Fabric manager version 3.0.x release notes
También para HP StorageWorks 2/32 - SAN Switch: Manual de instrucciones de instalación (20 páginas), Manual del usuario (22 páginas), Notas de la versión del firmware (14 páginas), Nota de publicación (48 páginas), Nota de publicación (32 páginas), Nota de publicación (14 páginas), Nota de publicación (4 páginas)

• To attach the inner rails to the SAN Switch 2/32, use the screw

holes marked 32.

• To attach the inner rails to the 4/8, 4/16, 8/8, or 8/24 SAN

Switch, use the five screw holes marked 8. The plenum requires

one screw hole marked 8 and one screw hole marked 16, as

shown in

Figure 8

on page 6.

• To attach the inner rails to the 4/32, 4/32B, 4/64, 8/40, or

8/80 SAN Switch, or the 400 MP Router, use the screw holes

marked 16, as shown in

• To attach the inner rails to the MP Router, FCoE Converged

Network Switch, or Encryption SAN Switch, use two screw holes

marked R and one screw hole marked 16.

CAUTION:

Be sure to use the screw holes labeled 8 when attaching

the inner rails to the SAN Switch 2/16V or SAN Switch

2/16N.

Figure 7

on page 5.

Secure the two inner rails (one on each side) to the device using

the appropriate number of screws. (See

For example,

Figure 6

with three screws, using two screw holes marked R and one screw

hole marked 16. Attaching both rails requires six screws.

Figure 7

shows an inner rail attached to the 4/64 SAN Switch with

five screws, using the screw holes marked 16. Attaching both rails

requires ten screws.

Figure 6 Securing the inner rails to the MP Router

Figure 7 Securing the inner rails to the 4/64 SAN Switch

NOTE:

For factory integration only , tighten the #8-32 x

5/16-inch Phillips panhead SEMS screws and torque

between 6 and 8 inch-pounds.

Page 5

Table

2.)

shows an inner rail attached to the MP Router

MR 25007a

I O

L N

S P

MR 2 5018b