HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Manual de instalación - Página 2

Navegue en línea o descargue pdf Manual de instalación para Interruptor HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 14 páginas. 1u rackmount tape enclosure
También para HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM: Instrucciones de instalación (2 páginas), Manual de instrucciones de instalación (20 páginas), Nota de publicación (14 páginas), Instrucciones de instalación (2 páginas), Manual de referencia (46 páginas)

Pen-and-ink Changes

This addendum consists two parts:

Note:

documents and then used, problems might arise from using obsolete information.

Pen-and-ink Changes

There are no pen-and-ink changes in this addendum.

Page Additions

The following pages describe the installation of the SAN Switch 2/32, SAN

Switch 2/16, and SAN Switch 2/8 in an HP Series 9000 or comparable EIA rack,

or in an HP System/e rack using the SAN Switch Universal Rack Mount Kit, part

number 331148-B21.

For each document, insert the following sheets as shown here:

1. After page 30 in the HP StorageWorks SAN Switch 2/32 Installation Guide

2. After page 29 in the HP StorageWorks SAN Switch 2/16 Installation Guide

3. After page 32 in the HP StorageWorks SAN Switch 2/8 Installation Guide

Pen-and-ink

Changes—provides instructions for locating specific text and

either deleting text, replacing text with new text, or adding new text at a

specific location.

Page

Additions—identifies where to add a page at a specific place in the

document and recommends how to attach the replacement pages.

If the changes within this addendum are not incorporated into the specified

SAN Switch Universal Rack Mount Kit Installation Addendum