HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Installation Manual - Page 2
Browse online or download pdf Installation Manual for Switch HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 14 pages. 1u rackmount tape enclosure
Also for HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM: Installation Instructions (2 pages), Installation Instructions Manual (20 pages), Release Note (14 pages), Installation Instructions (2 pages), Reference Manual (46 pages)
Print Page
Pen-and-ink Changes
This addendum consists two parts:
Note:
documents and then used, problems might arise from using obsolete information.
Pen-and-ink Changes
There are no pen-and-ink changes in this addendum.
Page Additions
The following pages describe the installation of the SAN Switch 2/32, SAN
Switch 2/16, and SAN Switch 2/8 in an HP Series 9000 or comparable EIA rack,
or in an HP System/e rack using the SAN Switch Universal Rack Mount Kit, part
number 331148-B21.
For each document, insert the following sheets as shown here:
1. After page 30 in the HP StorageWorks SAN Switch 2/32 Installation Guide
2. After page 29 in the HP StorageWorks SAN Switch 2/16 Installation Guide
3. After page 32 in the HP StorageWorks SAN Switch 2/8 Installation Guide
2
Pen-and-ink
Changes—provides instructions for locating specific text and
either deleting text, replacing text with new text, or adding new text at a
specific location.
Page
Additions—identifies where to add a page at a specific place in the
document and recommends how to attach the replacement pages.
If the changes within this addendum are not incorporated into the specified
SAN Switch Universal Rack Mount Kit Installation Addendum