HP StorageWorks SN6000 Instrucciones de instalación rápida - Página 2
Navegue en línea o descargue pdf Instrucciones de instalación rápida para Interruptor HP StorageWorks SN6000. HP StorageWorks SN6000 2 páginas. Fibre channel switch xpak stacking cable
También para HP StorageWorks SN6000: Manual de actualización (9 páginas), Instrucciones de instalación (4 páginas), Instrucciones de instalación rápida (2 páginas)
Imprimir página
Install the XPAK stacking cable
1.
Use your fingers or pliers to remove one XPAK
port cover from each switch
port covers for future use.
IMPORTANT:
To maintain proper ventilation,
leave covers in place on XPAK ports that are
not being used.
Figure 1 Removing the XPAK port cover
2.
Install the XPAK stacking cable connectors with
the circuit boards toward the mid-line of each
switch faceplate
(Figure
fits one way only. When installing an 8-cm
(3-inch) XPAK stacking cable, insert the cable
connectors into the ports simultaneously.
Figure 2 Inserting the cable connectors
1
1 Connector circuit board
(Figure
1). Save the
2). The cable connector
Page 2