HP Xw460c - ProLiant - Blade Workstation Manual de instalación - Página 31

Navegue en línea o descargue pdf Manual de instalación para Interruptor HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 33 páginas. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
También para HP Xw460c - ProLiant - Blade Workstation: Manual de aplicación (35 páginas), Manual de prevención de errores (12 páginas), Libro Blanco técnico (12 páginas), Actualización del firmware (9 páginas), Manual de instalación (2 páginas), Manual de preguntas frecuentes (14 páginas), Póster de instalación (9 páginas), Manual de gestión (28 páginas), Manual de hardware (23 páginas), Visión general (35 páginas), Manual del usuario (33 páginas), Manual de optimización (13 páginas), Garantía limitada (10 páginas), Manual de instrucciones de instalación (10 páginas), Manual de instrucciones de instalación (8 páginas), Instrucciones de instalación (4 páginas), Instrucciones de instalación (2 páginas)

Imprimir página
HP Xw460c - ProLiant - Blade Workstation Manual de instalación
Bay
8

Directory configuration parameters

Use the Directory Settings screen to set directory access for the currently selected enclosures. Record the
configuration parameters in the following table.
Table 4-9 Onboard Administrator Directory configuration parameters
Parameter
Enable LDAP authentication
Enable local users
Directory server address
Directory server SSL port
Search context 1–3
Use Microsoft®Windows NT®
account name mapping
(DOMAIN\username)

Network configuration parameters

Use the Onboard Administrator network settings screen to modify network configuration parameters for the
active HP Onboard Administrator.
Select Dynamic Host Configuration Protocol (DHCP) or Static Internet Protocol (IP).
Enter the DHCP or static IP configuration parameters for each active Onboard Administrator. Record the
configuration parameters in the following table.
Table 4-10 Onboard Administrator network configuration parameters
Parameter
IP address
Subnet mask
Gateway
DNS server 1
DNS server 2
EBIPA enabled (Y/N)
Possible value
Select the checkbox
to enable EBIPA or
leave it cleared to
disable EBIPA for the
bay.
Value
Value
EBIPA address
Possible value
parameter
###.###.###.###,
where ### ranges
from 0 to 255
Possible value
Yes or No
Yes or No
###.###.###.###, where ###
ranges from 0 to 255 or DNS
name of the directory server or
the name of the domain
1-65535
Maximum of 128 characters
Yes or No
Possible value
###.###.###.###, where ###
ranges from 0 to 255
###.###.###.###, where ###
ranges from 0 to 255
###.###.###.###, where ###
ranges from 0 to 255
###.###.###.###, where ###
ranges from 0 to 255
###.###.###.###, where ###
ranges from 0 to 255
Directory configuration parameters
Description
The IP address
assigned to the
device bay if EBIPA
is enabled
Description
Choice to enable or disable
LDAP authentication. Yes means
LDAP authentication is enabled.
No means LDAP authentication
is not enabled.
Choose to enable or disable
local users.
The IP address, DNS name, or
domain name of the directory
service
The port used for LDAP
communications
Searchable paths used to locate
the user when the user tries to
authenticate using directory
services
—
Description
Static IP address (leave blank
for DHCP)
Mask numbers (leave blank for
DHCP)
—
—
—
31