HP Xw460c - ProLiant - Blade Workstation 설치 매뉴얼 - 페이지 31

{카테고리_이름} HP Xw460c - ProLiant - Blade Workstation에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP Xw460c - ProLiant - Blade Workstation 33 페이지. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
HP Xw460c - ProLiant - Blade Workstation에 대해서도 마찬가지입니다: 구현 매뉴얼 (35 페이지), 오류 방지 매뉴얼 (12 페이지), 기술 백서 (12 페이지), 펌웨어 업데이트 (9 페이지), 설치 매뉴얼 (2 페이지), 자주 묻는 질문 매뉴얼 (14 페이지), 설정 포스터 (9 페이지), 관리 매뉴얼 (28 페이지), 하드웨어 매뉴얼 (23 페이지), 개요 (35 페이지), 사용자 설명서 (33 페이지), 최적화 매뉴얼 (13 페이지), 제한 보증 (10 페이지), 설치 지침 매뉴얼 (10 페이지), 설치 지침 매뉴얼 (8 페이지), 설치 지침 (4 페이지), 설치 지침 (2 페이지)

페이지 인쇄
HP Xw460c - ProLiant - Blade Workstation 설치 매뉴얼
Bay
8

Directory configuration parameters

Use the Directory Settings screen to set directory access for the currently selected enclosures. Record the
configuration parameters in the following table.
Table 4-9 Onboard Administrator Directory configuration parameters
Parameter
Enable LDAP authentication
Enable local users
Directory server address
Directory server SSL port
Search context 1–3
Use Microsoft®Windows NT®
account name mapping
(DOMAIN\username)

Network configuration parameters

Use the Onboard Administrator network settings screen to modify network configuration parameters for the
active HP Onboard Administrator.
Select Dynamic Host Configuration Protocol (DHCP) or Static Internet Protocol (IP).
Enter the DHCP or static IP configuration parameters for each active Onboard Administrator. Record the
configuration parameters in the following table.
Table 4-10 Onboard Administrator network configuration parameters
Parameter
IP address
Subnet mask
Gateway
DNS server 1
DNS server 2
EBIPA enabled (Y/N)
Possible value
Select the checkbox
to enable EBIPA or
leave it cleared to
disable EBIPA for the
bay.
Value
Value
EBIPA address
Possible value
parameter
###.###.###.###,
where ### ranges
from 0 to 255
Possible value
Yes or No
Yes or No
###.###.###.###, where ###
ranges from 0 to 255 or DNS
name of the directory server or
the name of the domain
1-65535
Maximum of 128 characters
Yes or No
Possible value
###.###.###.###, where ###
ranges from 0 to 255
###.###.###.###, where ###
ranges from 0 to 255
###.###.###.###, where ###
ranges from 0 to 255
###.###.###.###, where ###
ranges from 0 to 255
###.###.###.###, where ###
ranges from 0 to 255
Directory configuration parameters
Description
The IP address
assigned to the
device bay if EBIPA
is enabled
Description
Choice to enable or disable
LDAP authentication. Yes means
LDAP authentication is enabled.
No means LDAP authentication
is not enabled.
Choose to enable or disable
local users.
The IP address, DNS name, or
domain name of the directory
service
The port used for LDAP
communications
Searchable paths used to locate
the user when the user tries to
authenticate using directory
services
—
Description
Static IP address (leave blank
for DHCP)
Mask numbers (leave blank for
DHCP)
—
—
—
31