Panasonic PT-AE1000 Manual de instrucciones - Página 13
Navegue en línea o descargue pdf Manual de instrucciones para Proyector Panasonic PT-AE1000. Panasonic PT-AE1000 28 páginas. Panasonic lcd projector operating instructions
También para Panasonic PT-AE1000: Manual de instrucciones (28 páginas)
Imprimir página
Remote control operation
Adjusting the waveform of the input signal
*****
can monitor if the brightness and
JffflvtrUHMJ
contrast level of the input signal is in the
^ recommended range by displaying it in
waveform. See "WAVEFORM MONITOR'
on page 32.
1. Project a commercial adjusting signal.
2. Press the
WAVEFORM
button to display the
waveform monitor.
3. Press
WAVEFORM
button to select the
required adjusting mode.
4. Press A T ◄ ► to adjust the displaying
position of the waveform monitor.
BRIGHTNESS
waveform to 0 % (0 IRE).
_Setting range: -32 to +32
I Adjust the top line of the waveform
CONTRAST
to 100 % (100 IRE).
__| Setting range: -32 to +32
$ Adjusting the waveform in red
Display the
ADVANCED
menu and adjust
BRIGHTNESS R
and
CONTRAST R
with ◄ ►
Adjust the bottom line of the
waveform to 0 % (0 IRE).
Setting range: -16 to +16
Adjust the top line of the waveform
to 100 % (100 IRE).
Setting range: -16 to +16
Adjusting the wave form in green
Display the
ADVANCED
menu and adjust
SINGLE LINE SCAN(B)
FULL SCAN(R)
SINGLE LINE SCAN(G)
CONTRAST R
FULL SCAN(G)
| SINGLE LINE SCAN(R)
FULL SCANIBi
I SINGLE LINE SCAN(Y)
BRIGHTNESS G and CONTRAST G with
Adjust the bottom line of the
waveform to 0 % (0 IRE).
Setting range: -16 to +16
Adjust the top line of the waveform
to 100 % (100 IRE).
Deactivate the waveform
monitor.
Monitoring the~waveform of~
brightness and contrast of the
[whole image.
Monitoring the waveform of
brightness and contrast in
each horizontal line of the
image. Press A ▼ to select
BRIGHTNESS G
CONTRAST G
Setting range: -16 to +16
0 Adjusting the wave form in black
Display the
ADVANCED
menu and adjust
BRIGHTNESS B
and
CONTRAST B
with ◄ ►
Adjust thebottom line oflhe
waveform to 0 % (0 IRE).
Setting range: -16 to +16
Adjust the top line of the waveform
to 100 % (100 IRE).
the required line.
CONTRAST B
Setting range: -16 to +16
NOTE:
® SINGLE LINE SCAN is monitoring the signal in
the required line and more detailed adjustment is
available than FULL SCAN.
• When you adjust the SINGLE LINE SCAN, the
position of the waveform is depends on the
position of the selected line.
• When the WAVEFORM is displayed, the COLOR
MANAGEMENT is disables.
Monitor position
24
-
English
Remote control operation
Adjusting the focus and zoom
...
You can adjust the more detailed focus
LENS
1
and zoom of the projected image. Press
Switching the picture mode
du
.>.^ You can switch the preset picture mode
jPIC.MODE:
settings by pressing the PIC. MODE
button. Press the button until the required
setting is selected. See "PICTURE MODE"
on page 31.
the
LENS
button to display the
LENS control
menu.
See "LENS CONTROL Menu" on page 37.
NORMAL
DYNAMIC
CINEMA1
NATURAL
VIDEO
CINEMA2
CINEMA3
Adjusting the image
You can display one of the
PICTURE
or
IPIC
ADJUST!
ADVANCED
menu items by pressing the
J PICTURE ADJUSTMENT
button. Press
the button to switch between
PICTURE
and
ADVANCED
menu. Press A ▼ to
select the required menu item and < ► to
adjust.
) PICTURE menu items
PICTURE MODE, CONTRAST. BRIGHTNESS,
COLOUR, TINT, SHARPNESS, COLOUR
TEMPERATURE
and
DYNAMIC IRIS
P ADVANCED menu items
GAMMA, CONTRAST, BRIGHTNESS, COLOR
MANAGEMENT, NR, MPEG NR, CINEMA
REALITY and TV-SYSTEM
NOTE:
• For each menu items description, see "PICTURE
Menu" on page 31.
• The screen will be cleared after 7 seconds without
any operation.
Switching off the projector automatically
You can switch off the
POWER
SLEEP
automatically by setting the
SLEEP
* feature. Press the
SLEEP
button several
times to cycle through the duration of time.
See "SLEEP" on page 39.
OFF
240MIN.
1
f
60MIN.
210MIN.
3
w
90MIN.
180M1N.
#
|
120MIN.
**
150MIN.
Loading a saved setting
S
You can access saved settings instantly.
See "MEMORY LOAD" on page 33.
1
.Select the required setting from
MEMORY1 - 5.
• Undefined setting will not be displayed.
2.
Press ENTER to activate the selected setting.
NOTE:
• If you have not saved any settings,
MEMORY1 - 5
are not displayed.
English
-
25