Panasonic PT-AE1000 Manual de Instruções - Página 13

Procurar online ou descarregar pdf Manual de Instruções para Projetor Panasonic PT-AE1000. Panasonic PT-AE1000 28 páginas. Panasonic lcd projector operating instructions
Também para Panasonic PT-AE1000: Manual de Instruções (28 páginas)

Imprimir página

Panasonic PT-AE1000 Manual de Instruções

Remote control operation

Adjusting the waveform of the input signal

*****

can monitor if the brightness and

JffflvtrUHMJ

contrast level of the input signal is in the

^ recommended range by displaying it in

waveform. See "WAVEFORM MONITOR'

on page 32.

1. Project a commercial adjusting signal.

2. Press the

WAVEFORM

button to display the

waveform monitor.

3. Press

WAVEFORM

button to select the

required adjusting mode.

4. Press A T ◄ ► to adjust the displaying

position of the waveform monitor.

BRIGHTNESS

waveform to 0 % (0 IRE).

_Setting range: -32 to +32

I Adjust the top line of the waveform

CONTRAST

to 100 % (100 IRE).

__| Setting range: -32 to +32

$ Adjusting the waveform in red

Display the

ADVANCED

menu and adjust

BRIGHTNESS R

and

CONTRAST R

with ◄ ►

Adjust the bottom line of the

waveform to 0 % (0 IRE).

Setting range: -16 to +16

Adjust the top line of the waveform

to 100 % (100 IRE).

Setting range: -16 to +16

Adjusting the wave form in green

Display the

ADVANCED

menu and adjust

SINGLE LINE SCAN(B)

FULL SCAN(R)

SINGLE LINE SCAN(G)

CONTRAST R

FULL SCAN(G)

| SINGLE LINE SCAN(R)

FULL SCANIBi

I SINGLE LINE SCAN(Y)

BRIGHTNESS G and CONTRAST G with

Adjust the bottom line of the

waveform to 0 % (0 IRE).

Setting range: -16 to +16

Adjust the top line of the waveform

to 100 % (100 IRE).

Deactivate the waveform

monitor.

Monitoring the~waveform of~

brightness and contrast of the

[whole image.

Monitoring the waveform of

brightness and contrast in

each horizontal line of the

image. Press A ▼ to select

BRIGHTNESS G

CONTRAST G

Setting range: -16 to +16

0 Adjusting the wave form in black

Display the

ADVANCED

menu and adjust

BRIGHTNESS B

and

CONTRAST B

with ◄ ►

Adjust thebottom line oflhe

waveform to 0 % (0 IRE).

Setting range: -16 to +16

Adjust the top line of the waveform

to 100 % (100 IRE).

the required line.

CONTRAST B

Setting range: -16 to +16

NOTE:

® SINGLE LINE SCAN is monitoring the signal in

the required line and more detailed adjustment is

available than FULL SCAN.

• When you adjust the SINGLE LINE SCAN, the

position of the waveform is depends on the

position of the selected line.

• When the WAVEFORM is displayed, the COLOR

MANAGEMENT is disables.

Monitor position

English

Remote control operation

Adjusting the focus and zoom

...

You can adjust the more detailed focus

LENS

and zoom of the projected image. Press

Switching the picture mode

.>.^ You can switch the preset picture mode

jPIC.MODE:

settings by pressing the PIC. MODE

button. Press the button until the required

setting is selected. See "PICTURE MODE"

on page 31.

the

LENS

button to display the

LENS control

menu.

See "LENS CONTROL Menu" on page 37.

NORMAL

DYNAMIC

CINEMA1

NATURAL

VIDEO

CINEMA2

CINEMA3

Adjusting the image

You can display one of the

PICTURE

IPIC

ADJUST!

ADVANCED

menu items by pressing the

J PICTURE ADJUSTMENT

button. Press

the button to switch between

PICTURE

and

ADVANCED

menu. Press A ▼ to

select the required menu item and < ► to

adjust.

) PICTURE menu items

PICTURE MODE, CONTRAST. BRIGHTNESS,

COLOUR, TINT, SHARPNESS, COLOUR

TEMPERATURE

and

DYNAMIC IRIS

P ADVANCED menu items

GAMMA, CONTRAST, BRIGHTNESS, COLOR

MANAGEMENT, NR, MPEG NR, CINEMA

REALITY and TV-SYSTEM

NOTE:

• For each menu items description, see "PICTURE

Menu" on page 31.

• The screen will be cleared after 7 seconds without

any operation.

Switching off the projector automatically

You can switch off the

POWER

SLEEP

automatically by setting the

SLEEP

* feature. Press the

SLEEP

button several

times to cycle through the duration of time.

See "SLEEP" on page 39.

OFF

240MIN.

60MIN.

210MIN.

90MIN.

180M1N.

120MIN.

150MIN.

Loading a saved setting

You can access saved settings instantly.

See "MEMORY LOAD" on page 33.

.Select the required setting from

MEMORY1 - 5.

• Undefined setting will not be displayed.

Press ENTER to activate the selected setting.

NOTE:

• If you have not saved any settings,

MEMORY1 - 5

are not displayed.

English