Panasonic PT-CW230U Manual de instrucciones - Página 23

Navegue en línea o descargue pdf Manual de instrucciones para Proyector Panasonic PT-CW230U. Panasonic PT-CW230U 25 páginas. Network operations

Control commands via LAN (continued)

Use of telnet (continued)

Type the commands, refer to below table, to control the projector and then press "Enter" key for termination.

For example, type "C00" which is a command to turn on the projector, and press "Enter" key. Confirm the pro-

jector is turning on.

* Enter with ASCII 64-byte capital characters and one-byte characters.

To disconnect the communication, press "Ctrl" key and "]" key at the same time, type

"close" and then press "Enter" key on the Keyboard.

> close [return]

•

If the password or any command is not entered for more than 30 seconds, the communication will be

disconnected automatically. Please try again for the connection.

Command list table

Command

C00

C02

C09

C0A

C0B

C0C

C1C

C1D

Function

Power on

Power off

Volume up

Volume down

Audio Mute on

Audio Mute off

Menu display on

Menu display off