Panasonic PT-CW230U Panduan Petunjuk Pengoperasian - Halaman 23
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Proyektor Panasonic PT-CW230U. Panasonic PT-CW230U 25 halaman. Network operations
Control commands via LAN (continued)
Use of telnet (continued)
4)
Type the commands, refer to below table, to control the projector and then press "Enter" key for termination.
For example, type "C00" which is a command to turn on the projector, and press "Enter" key. Confirm the pro-
jector is turning on.
* Enter with ASCII 64-byte capital characters and one-byte characters.
To disconnect the communication, press "Ctrl" key and "]" key at the same time, type
"close" and then press "Enter" key on the Keyboard.
> close [return]
•
If the password or any command is not entered for more than 30 seconds, the communication will be
disconnected automatically. Please try again for the connection.
Command list table
Command
C00
C02
C09
C0A
C0B
C0C
C1C
C1D
Function
Power on
Power off
Volume up
Volume down
Audio Mute on
Audio Mute off
Menu display on
Menu display off
23