DiamondBoxx SUB8.2 Manual - Página 6
Navegue en línea o descargue pdf Manual para Altavoces DiamondBoxx SUB8.2. DiamondBoxx SUB8.2 12 páginas.
Imprimir páginaTWS (True Wireless Stereo) Button
This is used for True Wireless Stereo control. This is for
wireless linking of two 2nd or 3rd gen DiamondBoxx or two
DiamondBoxx SUB8.2 in a Main/Secondary LEFT and RIGHT
configuration or a Mono/Mono configuration.
To Wirelessly connect two compatiable DiamondBoxx perform the following.
1.
Power on the DiamondBoxx that will be the MAIN.
2.
Connect the Bluetooth device to it
3.
Power on the DiamondBoxx that will be SECONDARY
4.
Press and hold the TWS button on MAIN DiamondBoxx until the LED next to
the letter "M" blinks rapidly, then release button.
5.
Press and hold the TWS button on the Secondary DiamondBoxx until the LED
next to the letter "S" blinks rapidly, then release button.
6.
Wait for up to 2 minutes for the DiamondBoxxes to form a secure connection.
(It may pause the music on the Bluetooth device transmitting music so you
may have to restart your music)
7.
If after 2 minutes you are unable to make a connection press and hold the
TWS button on both DiamondBoxxes (one at a time) until the LED next to the
letter "C" flashes rapidly and then release button. This should clear the TWS
system, now start from step 1 again.
8.
Note the 2 DiamondBoxxes must be less than 30 feet from each other
typically.
To switch between Left/Right Stereo and Mono/Mono operation while in TWS
mode - Press and hold TWS button on the MAIN speaker until the LED next to
the letter "X" flashes, immediately release.