EasyPet EP-380R Manual del usuario - Página 14

Navegue en línea o descargue pdf Manual del usuario para Producto para el cuidado de mascotas EasyPet EP-380R. EasyPet EP-380R 19 páginas. Easypet rechargeable multi-dog remote training system

EasyPet EP-380R Manual del usuario
stimulation. When trying this on your dog, please always start from the LOWEST
level and increase the level gradually to find out the recognition level for the dog.
T
Short press button
start giving a static pulse stimulation at the selected level. A green LED light on the
collar receiver should come up during this correction period.
Short press "+" or "–" to adjust the level setting of static pulse stimulation. Short
T
press button
again to send out the new command. Dog A collar will start the static
pulse stimulation at the newly selected level. A green LED light on the collar receiver
should come up during this correction period.
To test if the static pulse stimulation is working, attach the supplied test bulb to
both of the metal prongs on the collar receiver. The test bulb should start flashing
when the collar receiver is giving out static pulse stimulation. (Please note the test
bulb is for test purpose ONLY. When the collar receiver is used on the dog, please
remove the test bulb from the collar receiver.)
Tips:
When on Level 99, you can quickly press plus "+" button once to go back to
Level 1. When on Level 1, you can quickly press minus "– "button once to increase to
Level 99.
Note:
For multi-dog training, please select the dog you would like to train by
pressing A, B or C button. When LCD screen is showing the correct dog selected, then
follow the above procedures to send out correction commands.
Step 6: Fit the Collar Receiver on the Dog
To ensure a proper fit, please follow the steps below:
1. With your dog standing, centre the collar receiver where contact points are
underneath your dog's neck, touching the skin. If you dog has a long or thick
coat, trim the hair around the contact points to ensure consistent contact.
2. The collar receiver should fit snugly, yet loose enough to allow one finger to
fit between the strap and your dog's neck. If the strap is too long for your
dog, cut off the excess length.
3. Allow your dog to wear the collar for several minutes, and then recheck the
fit. Check the fit again as your dog becomes more comfortable wearing the
collar receiver.
to send out command to Dog A collar receiver. Dog A collar will