EasyPet EP-380R Podręcznik użytkownika - Strona 14

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Produkt do pielęgnacji zwierząt domowych EasyPet EP-380R. EasyPet EP-380R 19 stron. Easypet rechargeable multi-dog remote training system

Drukuj stronę

stimulation. When trying this on your dog, please always start from the LOWEST

level and increase the level gradually to find out the recognition level for the dog.

Short press button

start giving a static pulse stimulation at the selected level. A green LED light on the

collar receiver should come up during this correction period.

Short press "+" or "–" to adjust the level setting of static pulse stimulation. Short

press button

again to send out the new command. Dog A collar will start the static

pulse stimulation at the newly selected level. A green LED light on the collar receiver

should come up during this correction period.

To test if the static pulse stimulation is working, attach the supplied test bulb to

both of the metal prongs on the collar receiver. The test bulb should start flashing

when the collar receiver is giving out static pulse stimulation. (Please note the test

bulb is for test purpose ONLY. When the collar receiver is used on the dog, please

remove the test bulb from the collar receiver.)

Tips:

When on Level 99, you can quickly press plus "+" button once to go back to

Level 1. When on Level 1, you can quickly press minus "– "button once to increase to

Level 99.

Note:

For multi-dog training, please select the dog you would like to train by

pressing A, B or C button. When LCD screen is showing the correct dog selected, then

follow the above procedures to send out correction commands.

Step 6: Fit the Collar Receiver on the Dog

To ensure a proper fit, please follow the steps below:

1. With your dog standing, centre the collar receiver where contact points are

underneath your dog's neck, touching the skin. If you dog has a long or thick

coat, trim the hair around the contact points to ensure consistent contact.

2. The collar receiver should fit snugly, yet loose enough to allow one finger to

fit between the strap and your dog's neck. If the strap is too long for your

dog, cut off the excess length.

3. Allow your dog to wear the collar for several minutes, and then recheck the

fit. Check the fit again as your dog becomes more comfortable wearing the

collar receiver.

to send out command to Dog A collar receiver. Dog A collar will