Dibal G300 Series Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Scales Dibal G300 Series. Dibal G300 Series 12 páginas.

SERIE G300

0 7 9 0

0 7 9 0 8

This indicates the euro phase in which the scales are set:

Phase 1: all sums are calculated in national

currencies, but can also be shown in euros (until

31-12-01).

Phase 2: sums are calculated in euros, but can

also be shown in national currencies ( from 1-1-02

to 28-2-02).

Phase 3: all sums are calculated in euros and

cannot be shown in national currencies ( from 1-3-

02).

 To change from phase 1 to phase 2, enter 6 0 2 2,

when the number 2 flashes, repeat the code.

 To change from phase 2 to phase 3, enter 9 8 0 8 ,

when wait flashes, repeat the code.

To return to a previous phase, consult your supplier or

technical assistance centre.

4.3

To programme this parameter, enter programming mode

and press

This parameter permits programming of a grams

"window" in the weight display, i.e., if the weight varies by

the same or less than the grams window, and the weight

is not stable, the weight will be updated after 2".

If the weight is stable, it will be shown immediately.

4.4

To programme this parameter, enter programming mode

and press 8

This parameter only applies to scales connected to TPV

or POS. To view the parameter, the scales must have

one of the following protocols: PCEAN (7), SANYO (9),

UNIPROX(14), BMC PS-2000 (18), UNIPROX with

checksum(19)

A value between 0 and 99 can be programmed, and this

value will be used as the EAN code heading in protocols

that so require.

4.2.4.

EURO PHASE