Dickey-John GAC 2500-UGMA Manual - Página 2
Navegue en línea o descargue pdf Manual para Equipamiento industrial Dickey-John GAC 2500-UGMA. Dickey-John GAC 2500-UGMA 2 páginas.
Imprimir páginaINSTALLATION INSTRUCTIONS
Figure 4
Remove Hex Bolt
7. Press down on the bracket to release.
Figure 5
Press Down on Bracket
8. Slide bracket forward and align with operating location.
Figure 6
Slide Bracket Forward
9. Insert hex bolt into operating location hole and securely tighten using the Allen wrench.
Figure 7
Insert Hex Bolt and Tighten
10. Perform the same procedure to the other bracket.
11. Once both brackets are securely tightened to the operating location, place instrument upright.
IMPORTANT: If for any reason this instrument is shipped, the hex bolts should be removed from the
operating location and secured back to the shipped locked location to protect the measurement cell during
transit!
2 /
Unlock Shipping Brackets
11001-1619-201207