Dickey-John GAC 2500-UGMA 매뉴얼 - 페이지 2
{카테고리_이름} Dickey-John GAC 2500-UGMA에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dickey-John GAC 2500-UGMA 2 페이지.
페이지 인쇄INSTALLATION INSTRUCTIONS
Figure 4
Remove Hex Bolt
7. Press down on the bracket to release.
Figure 5
Press Down on Bracket
8. Slide bracket forward and align with operating location.
Figure 6
Slide Bracket Forward
9. Insert hex bolt into operating location hole and securely tighten using the Allen wrench.
Figure 7
Insert Hex Bolt and Tighten
10. Perform the same procedure to the other bracket.
11. Once both brackets are securely tightened to the operating location, place instrument upright.
IMPORTANT: If for any reason this instrument is shipped, the hex bolts should be removed from the
operating location and secured back to the shipped locked location to protect the measurement cell during
transit!
2 /
Unlock Shipping Brackets
11001-1619-201207