Didgeridoo Pulse Jet Engine Manual de montaje - Página 5
Navegue en línea o descargue pdf Manual de montaje para Motor Didgeridoo Pulse Jet Engine. Didgeridoo Pulse Jet Engine 9 páginas.
Imprimir página5/9
1 1
5 5
INSTRUCTIONS
3 3
1
Grab the Plate.
2 2
2
Slide the Coller over the rod.
3
Screw the Tip into place.
NOTE
Use the Wrench to ensure a tight fit.
4
Grab the Bolt.
5
Slide the Diverter over the bolt.
NOTE
6 6
Make sure the curved face of the Diverter
& &
is facing away from the Bolt head.
6
Slide the Air Cover over the Bolt.
The orientation works both ways
7
Loosely screw the Bolt, with the Air Cover
A
and Diverter on it, into the rear of the
Plate.
NOTE
4 4
Insure the Air Cover fully covers the holes
on the Plate.
7
Tighten the bolt the rest of the way.
B
7 7
NOTE
Use the Wrench to ensure a tight fit.
The Air Controller is now assembled!
It should look like the image above.
NOTE
If you are having issues with misfiring
double check that the Plate holes
are fully covered by the Air Cover.
M10 Wrench
Air Controller
Assembly
PARTS LIST
Tip
Collar
Plate
Air Cover
Diverter
Bolt
TOOL LIST