Didgeridoo Pulse Jet Engine 조립 설명서 - 페이지 5

{카테고리_이름} Didgeridoo Pulse Jet Engine에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Didgeridoo Pulse Jet Engine 9 페이지.

페이지 인쇄

5/9

1 1

5 5

INSTRUCTIONS

3 3

Grab the Plate.

2 2

Slide the Coller over the rod.

Screw the Tip into place.

NOTE

Use the Wrench to ensure a tight fit.

Grab the Bolt.

Slide the Diverter over the bolt.

NOTE

6 6

Make sure the curved face of the Diverter

& &

is facing away from the Bolt head.

Slide the Air Cover over the Bolt.

The orientation works both ways

Loosely screw the Bolt, with the Air Cover

and Diverter on it, into the rear of the

Plate.

NOTE

4 4

Insure the Air Cover fully covers the holes

on the Plate.

Tighten the bolt the rest of the way.

7 7

NOTE

Use the Wrench to ensure a tight fit.

The Air Controller is now assembled!

It should look like the image above.

NOTE

If you are having issues with misfiring

double check that the Plate holes

are fully covered by the Air Cover.

M10 Wrench

Air Controller

Assembly

PARTS LIST

Tip

Collar

Plate

Air Cover

Diverter

Bolt

TOOL LIST