Axis M1045-LW Manual del usuario - Página 9
Navegue en línea o descargue pdf Manual del usuario para Cámara IP Axis M1045-LW. Axis M1045-LW 20 páginas.
También para Axis M1045-LW: Manual del usuario (16 páginas)
Imprimir página
AXIS M1045-LW Network Camera
Additional settings
Note
• WDR can cause artifacts in the image.
• WDR may not be available for all capture modes.
1. Go to Settings > Image > Wide dynamic range.
2. Turn on WDR.
3. If you still have problems, go to Exposure and adjust the Exposure zone to cover the area of interest.
Find out more about WDR and how to use it at axis.com/web-articles/wdr.
View and record video
This section includes instructions about how to configure your device. To learn more about how streaming and storage works, go to
Streaming and storage on page 13.
Reduce bandwidth and storage
Important
If you reduce the bandwidth it can result in loss of details in the picture.
1. Go to live view and select H.264.
2. Go to Settings > Stream.
3. Do one or more of the following:
-
Turn on the Zipstream functionality and select the desired level.
Note
The zipstream settings are used for both H.264 and H.265.
-
Turn on dynamic GOP and set a high GOP length value.
-
Increase the compression.
-
Turn on dynamic FPS.
Note
Web browsers do not support H.265 decoding. Use a video management system or application supporting H.265 decoding.
Set up network storage
To store recordings on the network, you need to set up your network storage.
Image with WDR.
9