Axis M1045-LW 사용자 설명서 - 페이지 9

{카테고리_이름} Axis M1045-LW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axis M1045-LW 20 페이지.
Axis M1045-LW에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

AXIS M1045-LW Network Camera

Additional settings

Note

• WDR can cause artifacts in the image.

• WDR may not be available for all capture modes.

1. Go to Settings > Image > Wide dynamic range.

2. Turn on WDR.

3. If you still have problems, go to Exposure and adjust the Exposure zone to cover the area of interest.

Find out more about WDR and how to use it at axis.com/web-articles/wdr.

View and record video

This section includes instructions about how to configure your device. To learn more about how streaming and storage works, go to

Streaming and storage on page 13.

Reduce bandwidth and storage

Important

If you reduce the bandwidth it can result in loss of details in the picture.

1. Go to live view and select H.264.

2. Go to Settings > Stream.

3. Do one or more of the following:

Turn on the Zipstream functionality and select the desired level.

Note

The zipstream settings are used for both H.264 and H.265.

Turn on dynamic GOP and set a high GOP length value.

Increase the compression.

Turn on dynamic FPS.

Note

Web browsers do not support H.265 decoding. Use a video management system or application supporting H.265 decoding.

Set up network storage

To store recordings on the network, you need to set up your network storage.

Image with WDR.