EPHESUS Stadium Manual de instrucciones de instalación - Página 9

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Equipo para DJ EPHESUS Stadium. EPHESUS Stadium 16 páginas. Stadium series

Imprimir página

AIRBURST: Using an RDM controller, set the DMX start channel for the luminaire's wireless controller card (housed in the

●

front junction box between the LED arrays). The personality setting should populate the channel footprint, if

pre-programmed correctly. Set the Show ID to match the transmitter Show ID.

otee:

In order to use Airburst controls, you must be using a City Theatrical Transceiver and the show id must be set to the

same channel as the show id on the fixtures.

Light Series

Personality

Stadium Pro

2 Channel

Stadium

1 Channel

Table 6. Default Channel Assignment unless otherwise noted

AIRMESH CONTROLSe: With airmesh controls, Ephesus will provide the Bluetooth program to connect wirelessly. Simply

●

open the provided application and connect to each fixture through Bluetooth recognition. Refer to the Airmesh control

manual for more information regarding the mesh network controls.

There are no physical control connections necessary for wireless controls.

Step 4 – Aim the Luminaires

Aiming the luminaires is a critical part of the LED lighting solution to ensure that light is evenly distributed on the playing

surface. There are two basic methods to properly aim a sports venue – Precision Laser Aiming by Coordinates, and

Orient-Tilt.

A. Precision Laser Aiming by Coordinates

Laser aiming is the most effective and preferred technique for aiming Ephesus LED sports lighting. This method

uses a laser mounted to the luminaire to point the fixture at a predetermined point on the playing surface using (X, Y)

coordinates. See the section below "Laser Mount Aiming" for further details on the technique.

Unless otherwise noted, aiming coordinates on Ephesus photometrics or project Installation drawings are based on the

origin (0, 0, 0) placed at center field, court, or ice. For baseball fields, origin is usually the back point of home plate. All

dimensions from that point are in feet along the playing surface unless otherwise noted.

B. Orient–Tilt

With the Orient-tilt method, the installer turns the luminaire according to predetermined angles. This technique is

extremely helpful for pre-aiming fixtures mounted on a cross arm on the ground before the lighting pole is lifted

up and set in place. However, this method is less accurate due to the variances in actual final pole and luminaire

locations and orientations compared to the approximated parameters used in the photometric design.

Wireless Control

Figure 7.

Channel Assignment (Unless

Otherwise Noted)

Channel 1

Warm LEDs

Channel 2

Cool LEDs

Channel 1

All LEDs

Installation Instructions - Stadium Series

EATON

IB528002EN

Installation instructions rev 20171011