Olympus E-10 - 4MP Digital Camera Manual de instrucciones - Página 12
Navegue en línea o descargue pdf Manual de instrucciones para Cámara digital Olympus E-10 - 4MP Digital Camera. Olympus E-10 - 4MP Digital Camera 41 páginas. Automatic pixel mapping feature
También para Olympus E-10 - 4MP Digital Camera: Manual de inicio rápido (2 páginas), Manual de conexión (9 páginas), Instrucciones (1 páginas)
Imprimir página
1
Connect the AC cable
plug to the AC input
connector on the charger.
2
Plug the AC power cord
into an AC power outlet.
3
Place the battery on the battery charger and slide it
in until you hear a click.
● The charging indicator may blink for an instant (less
than one second) when the battery is inserted or just
before charging is complete. However, this is normal
and merely shows that the charger is communicating
with the battery.
● Check the battery's status by the color of the
charging indicator.
Charging
indicator color
Orange
Green
Red
* Remove the battery immediately. If the battery can not
be fully charged under normal operating conditions, then
it is most likely defective. Replace the battery with a
new one.
Notes
In the following cases, it should be assumed that this
product is out of order. Unplug the AC power cord
immediately and consult your local Olympus
representative.
● Charging has not finished after six hours.
● The red or green charging indicator blinks after several
charges.
12
Charging the battery
Charging indicator
condition
Blinking.
Blinking.
Terminal
Lit.
Lit.
To home AC outlet
Battery status
Charging is
continuing
normally.
Charging is
complete.
An error has
occurred.*
Too much
charging time has
passed. The
battery has
weakened or is
defective.*