AccuLine 40-6535 Manual de instrucciones - Página 9
Navegue en línea o descargue pdf Manual de instrucciones para Nivel láser AccuLine 40-6535. AccuLine 40-6535 20 páginas. Automatic-leveling horizontal rotary laser level
Imprimir página
Height of Instrument (H.I.) - TILT
1. After powering on the instrument and entering into
auto-level status, press the tilt button. When the
indicator is on (see figure), the instrument enters
into TILT mode. If the leveled instrument is moved
or bumped, the head will stop rotation and the TILT indicator light and
laser beam will flash instead of the unit performing the auto-level
function. Press the tilt button on the panel or remote to quit the tilt
mode and enter into auto-level status.
2. Press the tilt button on the laser or remote again to enter the tilt mode.
Slope Adjusting Function (SLOPE)
This function must be operated by the remote control (see operating
panel shown in fig.1).
1. Select slope adjusting direction
The first press of X/Y button will illuminate the X indicator light (fig. 2).
The second press of X/Y button will illuminate the Y indicator light (fig.
3). The third press of the X/Y button will quit the slope-adjusting func-
tion and enter the unit into auto-level status.
2. Adjust the slope angle
When in either the x-axis or y-axis, press either of the two
up/down arrow keys on remote
control (fig.1) to adjust slope
angle.
Note: A single press of either key
activates fine tuning while a
continuous pressing activates
quick adjustment.
©2007 Johnson Level & Tool
9