AccuLine 40-6535 사용 설명서 - 페이지 9

{카테고리_이름} AccuLine 40-6535에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AccuLine 40-6535 20 페이지. Automatic-leveling horizontal rotary laser level

Height of Instrument (H.I.) - TILT

1. After powering on the instrument and entering into

auto-level status, press the tilt button. When the

indicator is on (see figure), the instrument enters

into TILT mode. If the leveled instrument is moved

or bumped, the head will stop rotation and the TILT indicator light and

laser beam will flash instead of the unit performing the auto-level

function. Press the tilt button on the panel or remote to quit the tilt

mode and enter into auto-level status.

2. Press the tilt button on the laser or remote again to enter the tilt mode.

Slope Adjusting Function (SLOPE)

This function must be operated by the remote control (see operating

panel shown in fig.1).

1. Select slope adjusting direction

The first press of X/Y button will illuminate the X indicator light (fig. 2).

The second press of X/Y button will illuminate the Y indicator light (fig.

3). The third press of the X/Y button will quit the slope-adjusting func-

tion and enter the unit into auto-level status.

2. Adjust the slope angle

When in either the x-axis or y-axis, press either of the two

up/down arrow keys on remote

control (fig.1) to adjust slope

angle.

Note: A single press of either key

activates fine tuning while a

continuous pressing activates

quick adjustment.