Olympus BX3-SSU Manual de instrucciones - Página 19

Navegue en línea o descargue pdf Manual de instrucciones para Microscopio Olympus BX3-SSU. Olympus BX3-SSU 24 páginas. Scanning stage with ultrasonic
También para Olympus BX3-SSU: Manual de instrucciones (20 páginas)

Imprimir página

Downloaded from

ManualsNet.com

CAUTION

Fig. 20

CAUTION

Fig. 21

search engine

Connecting the Power Cord

· Be sure to set the main switch of the BX3-CBH control box to

" (OFF) before connecting cables.

· Cables and cords are vulnerable when bent or twisted. Never

subject them to excessive force.

· Always use the power cord provided by Olympus. If no power

cord is provided, please select the proper power cord by referring

to the section "PROPER SELECTION OF THE POWER SUPPLY

CORD" at the end of this instruction manual.

1. Insert the connector 1 of the power cord firmly into the connector 2.

The power cord should be connected to a grounded/earthed,

3-conductor power outlet. If the power outlet is not grounded/

earthed properly, Olympus can no longer warrant the electrical

safety performance of the equipment.

2. Plug the power cord plug 3 into the wall outlet 4.

Should the power cord come in contact with the hot lamp

housing, the power cord could melt and cause electric shock.

Be sure to route the power cord away from the lamp housing.

BX3-SSU

(Figs 20 to 21)