Olympus BX3-SSU Manuel d'instructions - Page 19
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus BX3-SSU. Olympus BX3-SSU 24 pages. Scanning stage with ultrasonic
Également pour Olympus BX3-SSU : Manuel d'instructions (20 pages)
Imprimer la page
2
Downloaded from
ManualsNet.com
CAUTION
1
Fig. 20
CAUTION
3
4
CAUTION
Fig. 21
search engine
4
Connecting the Power Cord
· Be sure to set the main switch of the BX3-CBH control box to
"
" (OFF) before connecting cables.
· Cables and cords are vulnerable when bent or twisted. Never
subject them to excessive force.
· Always use the power cord provided by Olympus. If no power
cord is provided, please select the proper power cord by referring
to the section "PROPER SELECTION OF THE POWER SUPPLY
CORD" at the end of this instruction manual.
1. Insert the connector 1 of the power cord firmly into the connector 2.
The power cord should be connected to a grounded/earthed,
3-conductor power outlet. If the power outlet is not grounded/
earthed properly, Olympus can no longer warrant the electrical
safety performance of the equipment.
2. Plug the power cord plug 3 into the wall outlet 4.
Should the power cord come in contact with the hot lamp
housing, the power cord could melt and cause electric shock.
Be sure to route the power cord away from the lamp housing.
BX3-SSU
(Figs 20 to 21)
16