Olympus bx40 Manual de instrucciones - Página 8
Navegue en línea o descargue pdf Manual de instrucciones para Microscopio Olympus bx40. Olympus bx40 33 páginas. Replacement illuminator
También para Olympus bx40: Instrucciones de instalación (4 páginas)
![Olympus bx40 Manual de instrucciones](/uploads/products/server2/4282084/4282084.jpg)
Fig. 1
Fig. 2
Fig. 3
a
USe
Onlya
designated bulb 6V, SOWHAL halogen bulb (PHILIPS 5761). (
1. Holding the bulb @ with gloves or a piece of gauze, insert the bulb pins
@ fully into the pin holes 0. (Fig. 1)
* To prevent reduced bulb life or cracking, do not tauch the bulb
with bare hands. If fingerprints
are accidentally
left on the bulb,
wipe the bulb with a soft cloth.
2. Aligning the guide pins @ with the guide pin holes @ at the rear of the
microscope frame, and the plug @ with the socket Q), gently push the
lamp socket into place (Fig. 2)
A
Bulb Replacement
During Use or Right After Use
The bulb and the lamp socket and areas near these will be extremely
hot during use and right after use.
Press the main switch to "0" (OFF) and disconnect the power cord
from the Wall outlet. Then allow the old bulb and lamp socket to
cool before replacing the bulb with a new of the designated type.
1. Loosen the clamping screw @ at the front of the Stage.
2. Gently lower the Stage onto the substage dovetail @ and then tighten
the clamping screw (iJ
3
0