Olympus bx40 Instructions Manual - Page 8

Browse online or download pdf Instructions Manual for Microscope Olympus bx40. Olympus bx40 33 pages. Replacement illuminator
Also for Olympus bx40: Installation Instructions (4 pages)

Print Page

Fig. 1

Fig. 2

Fig. 3

USe

Onlya

designated bulb 6V, SOWHAL halogen bulb (PHILIPS 5761). (

1. Holding the bulb @ with gloves or a piece of gauze, insert the bulb pins

@ fully into the pin holes 0. (Fig. 1)

* To prevent reduced bulb life or cracking, do not tauch the bulb

with bare hands. If fingerprints

are accidentally

left on the bulb,

wipe the bulb with a soft cloth.

2. Aligning the guide pins @ with the guide pin holes @ at the rear of the

microscope frame, and the plug @ with the socket Q), gently push the

lamp socket into place (Fig. 2)

Bulb Replacement

During Use or Right After Use

The bulb and the lamp socket and areas near these will be extremely

hot during use and right after use.

Press the main switch to "0" (OFF) and disconnect the power cord

from the Wall outlet. Then allow the old bulb and lamp socket to

cool before replacing the bulb with a new of the designated type.

1. Loosen the clamping screw @ at the front of the Stage.

2. Gently lower the Stage onto the substage dovetail @ and then tighten

the clamping screw (iJ