Olympus bx40 Instructions Manual - Page 10

Browse online or download pdf Instructions Manual for Microscope Olympus bx40. Olympus bx40 33 pages. Replacement illuminator
Also for Olympus bx40: Installation Instructions (4 pages)

Print Page

Fig. 8

Fig. 9

Fig. 10

1. Remove the eyepiece sleeve dust taps (iJ.

2. Insert the eyepieces @ into the eyepiece sleeves as far as they will

go. (Fig. 8)

Ir When using the binocular

tube, helicoid

equipped

focusing

eyepieces

cannot be used.

When using the trinocular

Observation tube (U-TRBO) or super wide-

field trinocular

Observation

tube (U-SWTR)

When using a finder eyepiece or an eyepiece with micrometer adjustment,

insert this eyepiece into the right-hand eyepiece sleeve. When doing so,

make Sure that the eyepiece positioning pin @ fits into the notch @ on

the eyepiece sleeve. (Fig. 9)

QThe

super-widefield

trinocular Observation tube is equipped with a

positioning

notch on both eyepiece

sleeves.

Make sure that the

positioning pin on both eyepieces fits into the respective notch.

The power Cord is vulnerable when bent or twisted. Never subject

it to excessive forte.

Make Sure that the main switch @ is on "0" (OFF) before connecting

the power Cord. (Fig. IO)

Always use the power Cord provided by Olympus.

If no power

cord is provided, please select the proper power cord by referring

to the section "PROPER SELECTION OF THE POWER SUPPLY

CORD" at the end of this instruction manual.

1. Connect the power Cord plug @ to the AC receptacle 0. (Fig. 10)

2. Plug the power Cord plug @ into a Wall outlet. (Fig. 11)

Connect the power cord correctly and ensure that the ground

terminal of the power supply and that of the wall outlet are properly

connected. If the equipment

is not grounded,

Olympus tan no

longer Warrant the electrical

safety and Performance

of the

equipment.

Fig. 11