Olympus BX52 Manual de instrucciones - Página 14

Navegue en línea o descargue pdf Manual de instrucciones para Microscopio Olympus BX52. Olympus BX52 37 páginas. System

3-3 Stage

Fig. 14

Fig. 15

Fig. 16

Placing the Specimen

# The dimensions of the slide glass should be 26 x 76 mm with thick-

ness of 0.9 to 1.2 mm, and the cover glass should have thickness of

0.17 mm.

# When observing very large specimens, remove the slide holder and

place the specimen directly on the stage.

Microscopy with Double-Slide Holder (Fig. 14)

1. Turn the coarse adjustment knob @ to lower the stage.

2. Open the spring-loaded curved finger ² on the slide holder and place

one or two specimen slides on the stage from the front.

3. After placing the sides as far as they will go, gently release the curved

finger.

Microscopy with Single-Slide Holder (Fig. 15)

The specimen side can easily be placed by sliding it into the slide holder

from the front.

Using an Oil Immersion Objective

Adsorption of immersion oil can cause the specimen to drift. In such

cases, it is recommended to use the optional BH2-SCB-3 specimen clip

³ for oil immersion objectives. (Fig. 16)

Using an Oil Immersion Condenser

It may be effective to use the optional U-SVRO (right-hand knob) or U-

SVLO (left-hand knob) slotted stage which prevents close contact be-

tween the specimen and stage.