Olympus CX33 Manual de instrucciones - Página 8

Navegue en línea o descargue pdf Manual de instrucciones para Microscopio Olympus CX33. Olympus CX33 40 páginas. Biological microscope

Maintenance and storage

Do not leave stains or fingerprints on the lenses and filters. If they get dirty, blow away dust with a commercially

available blower and gently wipe the lens or filter with a piece of cleaning paper (or clean gauze). Only when cleaning

fingerprints and oil stains, slightly moisten a piece of cleaning paper with commercially available absolute alcohol

and wipe them off with it.

Since the absolute alcohol is highly flammable, it must be handled carefully. Be sure to keep it away

CAUTION

from open flames or potential sources of electrical sparks. For example, the electrical equipment that

is switched ON and OFF may cause the ignition of a fire. Also, always use absolute alcohol only in a

well-ventilated room.

2. Wipe the portions other than the lens with a dry soft cloth. If the dirt cannot be removed by dry-wiping, moisten a soft

cloth with diluted neutral detergent and wipe the dirty surface with it.

Do not use organic solvents because they may deteriorate the coated surface or plastic parts.

NOTE

3. After using this product, store it in a dry place or cover it with a dust cover. If you need the dedicated dust over (made

by Olympus), contact Olympus.

Do not use a highly sealable cover, such as a plastic bag, etc. as a dust cover. The humidity in the

NOTE

microscope may increase to damage the product.

When disposing of this product, be sure to follow the regulations and rules of your local government. Contact Olympus

for any questions.

Intended use

This product has been designed to be used to observe magnified images of specimens in various routine work and

research applications.

This includes the observation of living cells or of specimen taken from tissues to gain physiological or morphological

information at hospitals or laboratories. Typical field of applications are genetics, human blood and tissue examination,

neurology, pharmacology and cellular biology.

Do not use this instrument for any purpose other than its intended use.

This product complies with the requirements of directive 98/79/EC concerning in vitro

diagnostic medical devices. CE marking means the conformity to the directive.

This product is applied with the requirements of EMC standard IEC/EN61326-2-6 and

IEC/EN61326-1 concerning electromagnetic compatibility.

This product complies with the emission and immunity requirements described in IEC61326

series. The electromagnetic environment should be evaluated prior to operation of this product.