Olympus IX71 Folleto y especificaciones - Página 10

Navegue en línea o descargue pdf Folleto y especificaciones para Microscopio Olympus IX71. Olympus IX71 16 páginas. Microscope z-axis motor drive
También para Olympus IX71: Manual de instalación (11 páginas)

Imprimir página

Motorized system for live cell imaging.

Controlling functions via PC, handset or operating buttons on the microscope body

Functions of IX81 control software /IX2-BSW

Nearly every operating function on the IX81 can be allocated to operation

buttons on the PC, the hand switch and the microscope in any individual or

multiple combinations by using IX2-BSW* control software. Some image

analysis software can also be used to control microscope operation, image

capturing and analysis; in this case, all operations are done from a single

PC.

* Included with the system controller IX2-UCB2

Example : Switching from fluorescence observation to Nomarski DIC.

Close shutter for fluorescence

illumination

With the IX81, this

sequence of

Exchange FL mirror unit for

functions can be

DIC mirror unit

allocated to

a single button

Open shutter for transmitted

illumination

Parfocal compensation function among objectives

This function allows the focus point to be matched from

low to high magnification objectives. Refocusing each time

the magnification is changed is no longer necessary.

Malfunction prevention

Motorized units ensure that complicated operations are

performed without error. Once the usage conditions are

set, the setting screen can be hidden to avoid accidental

change leading to faulty operation.

Setting sensitivity of the fine focus movement for

each objective magnification

Users can set the amount of the fine focus movement per

rotation of the focus adjustment knob.

Save setting conditions for each operator

Customized data can be stored in folders, and each folder

labeled for different users or sets of conditions.

Motorized universal condenser/

IX2-LWUCDA2

This condenser has six built-in optical

components to enable brightfield, phase

contrast and Nomarski DIC observations.

Software allows switching optical

components to be synchronized with the

objective. (Manual AS included.)

Handset/U-HSTR2

A remote handset controls all motorized

functions via a convenient and

programmable interface.

Focus handle/U-FH

The remote focus handle duplicates the feel

and function of the microscope's focus

knobs. Additional controls include

fine/coarse focus selection, lamp on/off,

shutter open/close, and camera vs. visual

observation.

Microscope front panel

Easy to use buttons allow selection of light

path, light intensity and lamp on/off control.

Auxiliary buttons can be custom

programmed. Includes LED lamp intensity

meter.

Motorized bottom

port unit with

C-mount/IX2-TVRAC

Motorized Units

Motorized shutter/IX2-SHA

Can be mounted in both transmitted and

reflected light paths.

Motorized filter wheel/

U-FWR and U-FWO

6 positions motorized filter wheel is offered

for both excitation and observation.

Motorized sextuple

U-FWR

revolving nosepiece

Up to 6 objectives are mounted

simultaneously, included with microscope

frame.

Motorized fluorescent cube

turret/ IX2-RFACA

Accepts up to 6 fluorescence filter cubes,

making it easy to switch between them

during fluorescence observation of

multistained specimens. (Manual shutter

included)

Internal motorized focus drive

With minimum movement of 0.01 µm,

the user has precise focus control.

Objective escape and

zero-return buttons

Moves objective to lower focus limit.

Allows setting of default focus position.

* Equipped on each side of microscope frame.

System controller/IX2-UCB2

All motorized units are powered by this

external system controller. Included is an

RS232C connection for PC commands and

expansion slots for future system upgrades.

U-FWO