Olympus IX71 Broşür ve Teknik Özellikler - Sayfa 10
Mikroskop Olympus IX71 için çevrimiçi göz atın veya pdf Broşür ve Teknik Özellikler indirin. Olympus IX71 16 sayfaları. Microscope z-axis motor drive
Ayrıca Olympus IX71 için: Kurulum Kılavuzu (11 sayfalar)
Sayfayı Yazdır
Motorized system for live cell imaging.
Controlling functions via PC, handset or operating buttons on the microscope body
Functions of IX81 control software /IX2-BSW
Nearly every operating function on the IX81 can be allocated to operation
buttons on the PC, the hand switch and the microscope in any individual or
multiple combinations by using IX2-BSW* control software. Some image
analysis software can also be used to control microscope operation, image
capturing and analysis; in this case, all operations are done from a single
PC.
* Included with the system controller IX2-UCB2
Example : Switching from fluorescence observation to Nomarski DIC.
q
Close shutter for fluorescence
illumination
With the IX81, this
sequence of
w
Exchange FL mirror unit for
functions can be
DIC mirror unit
allocated to
a single button
e
Open shutter for transmitted
illumination
Parfocal compensation function among objectives
This function allows the focus point to be matched from
low to high magnification objectives. Refocusing each time
the magnification is changed is no longer necessary.
Malfunction prevention
Motorized units ensure that complicated operations are
performed without error. Once the usage conditions are
set, the setting screen can be hidden to avoid accidental
change leading to faulty operation.
Setting sensitivity of the fine focus movement for
each objective magnification
Users can set the amount of the fine focus movement per
rotation of the focus adjustment knob.
Save setting conditions for each operator
Customized data can be stored in folders, and each folder
labeled for different users or sets of conditions.
17
Motorized universal condenser/
IX2-LWUCDA2
This condenser has six built-in optical
components to enable brightfield, phase
contrast and Nomarski DIC observations.
Software allows switching optical
components to be synchronized with the
objective. (Manual AS included.)
Handset/U-HSTR2
A remote handset controls all motorized
functions via a convenient and
programmable interface.
Focus handle/U-FH
The remote focus handle duplicates the feel
and function of the microscope's focus
knobs. Additional controls include
fine/coarse focus selection, lamp on/off,
shutter open/close, and camera vs. visual
observation.
Microscope front panel
Easy to use buttons allow selection of light
path, light intensity and lamp on/off control.
Auxiliary buttons can be custom
programmed. Includes LED lamp intensity
meter.
Motorized bottom
port unit with
C-mount/IX2-TVRAC
Motorized Units
Motorized shutter/IX2-SHA
Can be mounted in both transmitted and
reflected light paths.
Motorized filter wheel/
U-FWR and U-FWO
6 positions motorized filter wheel is offered
for both excitation and observation.
Motorized sextuple
U-FWR
revolving nosepiece
Up to 6 objectives are mounted
simultaneously, included with microscope
frame.
Motorized fluorescent cube
turret/ IX2-RFACA
Accepts up to 6 fluorescence filter cubes,
making it easy to switch between them
during fluorescence observation of
multistained specimens. (Manual shutter
included)
Internal motorized focus drive
With minimum movement of 0.01 µm,
the user has precise focus control.
Objective escape and
zero-return buttons
Moves objective to lower focus limit.
Allows setting of default focus position.
* Equipped on each side of microscope frame.
System controller/IX2-UCB2
All motorized units are powered by this
external system controller. Included is an
RS232C connection for PC commands and
expansion slots for future system upgrades.
U-FWO
18