Olympus SZX-AR1 Ayuda de software - Página 9

Navegue en línea o descargue pdf Ayuda de software para Microscopio Olympus SZX-AR1. Olympus SZX-AR1 41 páginas.
También para Olympus SZX-AR1: Manual de instrucciones (8 páginas)

Imprimir página

1　Operation procedure of the software

Creating barcodes (QR codes)

■

① Click [Barcode Creation].

② Create a barcode (QR Code) that stores the file path

information described in the [File path to be saved

for barcode] field.

Reference

When you read the barcode (QR code) with a

barcode reader, it will start reading the content file

of the stored file path.

③ Click [Save as image] to save the barcode (QR Code).

(a) Select the [Error correction level].

Barcodes (QR codes) have the ability to recover data

even if a part of the code is dirty or damaged. There

are four "Error correction levels": L (7%), M (15%), Q

(25%), and H (30%). Increasing the level improves the

error correction capability, but increases the size of

the code because the amount of data increases. The

level to be selected is determined by overall

consideration of the usage environment, code size,

etc. Select level L or M for environments with less

chance of getting dirty, and select level Q or H for

environments with more chance of getting dirty.

(b) Set the size by directly entering 200-999 (pixels).

1.3　Slide operation

Adding or deleting slides

■

(a) To add a slide, click [Add] and add a new slide after

the selected slide.　

(b) If you want to delete an unnecessary slide, click

[Delete] to delete the selected slide.

Reference

･The [Delete] key can also be used for deleting

operation.

･You can also use the [Ctrl+A] shortcut to select

all.

･You can select multiple items by holding down the

[Ctrl] key while selecting them.