Olympus SZX-AR1 Ayuda de software - Página 8

Navegue en línea o descargue pdf Ayuda de software para Microscopio Olympus SZX-AR1. Olympus SZX-AR1 41 páginas.
También para Olympus SZX-AR1: Manual de instrucciones (8 páginas)

Imprimir página

1.2　File operation

Creating a new file

■

① To create a new operating procedure, click [New].

For details on how to create an operating procedure,

please refer to

P.10 to

Loading a file

■

① To load a file, click [Open].

② Select an ARM file and click [Open].

Reference

･You can also use a barcode reader to read a QR

code saved by ‹Output›.

･For details on the settings for using a barcode

reader, please refer to P.35.

･QR code is a registered trademark of DENSO

WAVE INCORPORATED.

Saving a file

■

① To save a file, click [Save As] or [Save].

② Select ARM file for the file type.

③ Enter a file name and click [Save].

(a) If you want to protect your file, click [Protect File] to

enable file protection.

This function is used to check if the file will be

opened as read-only the next time it is opened. If you

set it as read-only, the content file will be opened in

the [Start the task] mode.

(b) If you save a file with the file protection enabled, a

message will be displayed the next time you open the

file.

No: [Create operating procedures] mode

The operation will be started in each mode.

23.

1　Operation procedure of the software