Olympus SZX-AR1 Довідка про програмне забезпечення - Сторінка 8
Переглянути онлайн або завантажити pdf Довідка про програмне забезпечення для Мікроскоп Olympus SZX-AR1. Olympus SZX-AR1 41 сторінка.
Також для Olympus SZX-AR1: Інструкція з експлуатації (8 сторінок)
Друкувати сторінку
1.2 File operation
Creating a new file
■
① To create a new operating procedure, click [New].
For details on how to create an operating procedure,
please refer to
P.10 to
Loading a file
■
① To load a file, click [Open].
② Select an ARM file and click [Open].
Reference
･You can also use a barcode reader to read a QR
code saved by ‹Output›.
･For details on the settings for using a barcode
reader, please refer to P.35.
･QR code is a registered trademark of DENSO
WAVE INCORPORATED.
Saving a file
■
① To save a file, click [Save As] or [Save].
② Select ARM file for the file type.
③ Enter a file name and click [Save].
(a) If you want to protect your file, click [Protect File] to
enable file protection.
This function is used to check if the file will be
opened as read-only the next time it is opened. If you
set it as read-only, the content file will be opened in
the [Start the task] mode.
(b) If you save a file with the file protection enabled, a
message will be displayed the next time you open the
file.
(c) Yes: [Start the task] mode
No: [Create operating procedures] mode
The operation will be started in each mode.
23.
5
1 Operation procedure of the software