Olympus SZX16 Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Microscopio Olympus SZX16. Olympus SZX16 40 páginas. Research high-class stereo microscope
También para Olympus SZX16: Visión general (24 páginas), Manual de instrucciones (36 páginas), Manual de instrucciones (28 páginas)

Imprimir página

Getting Ready

Downloaded from

ManualsNet.com

search engine

1. A microscope is a precision instrument. Handle it with care and

avoid subjecting it to sudden or severe impact.

2. Do not use the microscope where it is subjected to direct sunlight,

high temperature and humidity, or vibration. (For the operating

environment, see "6 SPECIFICATIONS" (P. 15).)

3. When moving the microscope, remove the specimen in advance.

Then, hold the front part of the base with one hand and hold

the rear part of the base with the other hand to avoid tilting the

microscope.

Also remove any module or attachment from the microscope to

minimize the weight before moving.

4. Observe the following cautions when operating the coarse focus

adjustment knob or the zooming knob.

Operation Manipulated Controls

Coarse/fine focus

Focusing

adjustment knobs a

Zooming Zooming knob b

5. Only one intermediate attachment can basically be used, but two

attachments may also be used though the peripheral part of the

image may be obscured.

For the coaxial vertical illuminator (SZX2-ILLC16) and reflected

fluorescent light illuminator (SZX2-RFA16), only either can be

attached because they must always be attached at the lowest

position.

Caution

1. If the knob hits the upper or lower

limiting mechanism violently

or it is rotated after it hits a

limiting mechanism, the internal

mechanism may be damaged.

2. If the knobs on the left and right

are rotated in opposite directions,

the internal mechanism will be

damaged. (The rotation tension of

the coarse focus adjustment knob

should be adjusted using the

rotation tension adjustment ring

c on the knob. See page 7.)