Olympus SZX16 Manual de instruções - Página 6
Procurar online ou descarregar pdf Manual de instruções para Microscópio Olympus SZX16. Olympus SZX16 40 páginas. Research high-class stereo microscope
Também para Olympus SZX16: Visão geral (24 páginas), Manual de instruções (36 páginas), Manual de instruções (28 páginas)
![Olympus SZX16 Manual de instruções](/uploads/products/server2/4283918/4283918.jpg)
1
Getting Ready
2
Downloaded from
ManualsNet.com
b
c
a
search engine
1. A microscope is a precision instrument. Handle it with care and
avoid subjecting it to sudden or severe impact.
2. Do not use the microscope where it is subjected to direct sunlight,
high temperature and humidity, or vibration. (For the operating
environment, see "6 SPECIFICATIONS" (P. 15).)
3. When moving the microscope, remove the specimen in advance.
Then, hold the front part of the base with one hand and hold
the rear part of the base with the other hand to avoid tilting the
microscope.
Also remove any module or attachment from the microscope to
minimize the weight before moving.
4. Observe the following cautions when operating the coarse focus
adjustment knob or the zooming knob.
Operation Manipulated Controls
Coarse/fine focus
Focusing
adjustment knobs a
Zooming Zooming knob b
5. Only one intermediate attachment can basically be used, but two
attachments may also be used though the peripheral part of the
image may be obscured.
For the coaxial vertical illuminator (SZX2-ILLC16) and reflected
fluorescent light illuminator (SZX2-RFA16), only either can be
attached because they must always be attached at the lowest
position.
Caution
1. If the knob hits the upper or lower
limiting mechanism violently
or it is rotated after it hits a
limiting mechanism, the internal
mechanism may be damaged.
2. If the knobs on the left and right
are rotated in opposite directions,
the internal mechanism will be
damaged. (The rotation tension of
the coarse focus adjustment knob
should be adjusted using the
rotation tension adjustment ring
c on the knob. See page 7.)
1. If the knob hits the upper or lower
limiting mechanism violently
or it is rotated after it hits a
limiting mechanism, the internal
mechanism may be damaged.
2. If the knobs on the left and right
are rotated in opposite directions,
the internal mechanism will be
damaged.