Olympus U-CBS Manual de instrucciones - Página 14
Navegue en línea o descargue pdf Manual de instrucciones para Microscopio Olympus U-CBS. Olympus U-CBS 16 páginas. Optical microscope accessory coded function system
También para Olympus U-CBS: Manual de instrucciones (16 páginas), Manual de instrucciones (16 páginas)
Imprimir página
Attaching the hand switch
The hand switch is provided with the magnet. Adhering the attaching plate made of iron on the microscope frame allows
you to secure the hand switch to the attaching plate. (Two attaching plates are provided with the hand switch and one of
them is for use as a spare.)
c
a
11
d
3
b
1
Attach the attaching plate b to the magnet on the bottom of the
hand switch a .
Do not remove the sheet on the adhesive surface of the attaching
TIP
plate until the attaching position is decided.
2
Decide the attaching position c easy to operate the hand switch (
part) near the right or left coarse adjustment knob.
Be careful if the hand switch is attached too close to the
TIP
coarse focusing knob, when the pre-focusing lever d is
rotated, the hand switch may contact the pre-focusing lever.
3
Clean the attaching position with a soft cloth, remove the sheet on the
adhesive surface of the attaching plate and attach the hand switch
firmly to the microscope frame.
· Since the hand switch is provided with the magnet, do not
CAUTION
let objects that are affected by magnetism come close to
the hand switch.
· Be careful, if the connector of the coded revolving
nosepiece is not connected to U-CBS, the hand switch
does not function.
If the cable for the hand switch disturbs your operation, bundle
TIP
the cable with the Velcro tape provided with the hand switch.
Coded function system