AXIXTECH SAF205H Manual de instalación y funcionamiento - Página 5
Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Amplificador AXIXTECH SAF205H. AXIXTECH SAF205H 16 páginas. Electronic handheld siren
Imprimir página
INSTALLATION
It is essential to install the unit properly to ensure safe and reliable operation. Please read through
all instructions thoroughly and carefully before installing the unit. Failure to follow these instruc-
tions could result in serious damage to the unit or vehicle and may void warranties.
The correct mounting and wiring is key to the effectiveness of SAF205H siren. Installers must
read and follow installation instructions and warnings in the manual from original manufacturer.
The vehicle operator should verify the siren system is fastened to the vehicle securely and is
functioning properly. Failure to follow all safety precautions and instructions may cause property
damage, injury, or death.
WARNING: The installer must have good knowledge of electricity, vehicle electrical systems and
emergency equipment. Always seek professional assistance if in doubt.
WARNING
Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)
CONTENTS
Inspect the product contents carefully to see if there is shipping damage or missing content.
Contents include:
1pc – Siren (Amplifier)
1pc – Handheld Controller with Coil Cord
1pc – Handheld Controller Mounting Bracket
1pc – 12-Pin Siren Input Connector
1pc – 2-Pin Light Control Power Input Connector
1pc – 8-Pin Light Control Output Connector
Please contact supplier immediately if any component is missing or damaged.
MOUNTING
Mount the siren unit in a location that is not exposed directly to weather elements such as the
driver compartment firewall, below the seat, or in the trunk; and away from any air bag deployment
areas. Mount the handheld controller in an area where it can be easily accessed by the vehicle
operator, and not affect the vehicle the air bag. Be sure that all wiring harness connections are
made prior to connecting the harness to the amplifier unit.
WARNING: Do not interfere with the proper operation of the vehicle airbag deployment system.
Ensure to install "Operation Warning Label" in the vehicle in an area that is clearly visible to
operators and passengers.
1pc – 6' Extension Cable
1pc – Extension Cable Connector
1pc – 15 Button Plate
1pc – Button Decals
1pc – User Manual
1pc – Operation Warning Label
- 4 -
SAF205H Siren_v.1