- ページ 5

アンプ AXIXTECH SAF205HのPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。AXIXTECH SAF205H 16 ページ。 Electronic handheld siren

INSTALLATION

It is essential to install the unit properly to ensure safe and reliable operation. Please read through

all instructions thoroughly and carefully before installing the unit. Failure to follow these instruc-

tions could result in serious damage to the unit or vehicle and may void warranties.

The correct mounting and wiring is key to the effectiveness of SAF205H siren. Installers must

read and follow installation instructions and warnings in the manual from original manufacturer.

The vehicle operator should verify the siren system is fastened to the vehicle securely and is

functioning properly. Failure to follow all safety precautions and instructions may cause property

damage, injury, or death.

WARNING: The installer must have good knowledge of electricity, vehicle electrical systems and

emergency equipment. Always seek professional assistance if in doubt.

WARNING

Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage.

Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.

(Ref. OSHA 1910.95 for occupational noise exposure guidelines)

Inspect the product contents carefully to see if there is shipping damage or missing content.

Contents include:

1pc – Siren (Amplifier)

1pc – Handheld Controller with Coil Cord

1pc – Handheld Controller Mounting Bracket

1pc – 12-Pin Siren Input Connector

1pc – 2-Pin Light Control Power Input Connector

1pc – 8-Pin Light Control Output Connector

Please contact supplier immediately if any component is missing or damaged.

Mount the siren unit in a location that is not exposed directly to weather elements such as the

driver compartment firewall, below the seat, or in the trunk; and away from any air bag deployment

areas. Mount the handheld controller in an area where it can be easily accessed by the vehicle

operator, and not affect the vehicle the air bag. Be sure that all wiring harness connections are

made prior to connecting the harness to the amplifier unit.

WARNING: Do not interfere with the proper operation of the vehicle airbag deployment system.

Ensure to install "Operation Warning Label" in the vehicle in an area that is clearly visible to

operators and passengers.

1pc – 6' Extension Cable

1pc – Extension Cable Connector

1pc – 15 Button Plate

1pc – Button Decals

1pc – User Manual

1pc – Operation Warning Label

- 4 -

SAF205H Siren_v.1