Olympus BX3-SSU Manual de instrucciones - Página 9
Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento médico Olympus BX3-SSU. Olympus BX3-SSU 20 páginas. Scanning stage with ultrasonic
También para Olympus BX3-SSU: Manual de instrucciones (24 páginas)
Imprimir página
3
3
OPERATION OF SCANNING STAGE WITH ULTRASONIC
When you use BX3-SSU for the first time, be sure to perform the Auto Compensation of the stage. For detail procedures,
refer to "Auto Compensation of the Stage" described in the previous page.
1
2
Fig. 2
3
Fig. 3
2
1
Fig. 4
1
Turning the Power ON
} Ensure that the cables are connected correctly and securely.
Set the main switches to " I " (ON) in the following sequence.
1. Set the main switch @ of the BX3-CBH control box to " I " (ON).
2. Set the main switch 2 of the control box for BX3-SSU to " I " (ON).
2
Moving the Stage
1. Rotate the Y-axis knob 2 and X-axis knob @ to move the stage.
2
Factory setting: 10 mm displacement per turn for the coarse adjustment,
1
2. Press the coarse/fine selector button 3 to switch the knob functions
between the coarse and fine adjustment.
· Pushed in: Coarse adjustment.
· Out position: Fine adjustment.
} The tone occurred when operating the stage may vary drastically in some
cases, but it does not cause any problem for the product performance.
} The stage may be vibrated slightly in some cases when starting the stage,
but the product is not damaged.
3
Replacing the Fuses
1. Set the main switch of the control box for BX3-SSU to "
unplug the power cord connector from the power outlet.
2. Draw out the fuse box @ by inserting a flat object such as a tip of
screwdriver into the slit 2 on the top surface of the fuse box.
3. Replace both of the fuses in the fuse box with new ones.
<< Applicable fuses >>
T3.15A(H)250V (LITTELFUSE 2153.15)
CAUTION
Using a non-specified fuse may cause a fire hazard.
4. Place the fuse box in the original position.
0.2 mm displacement per turn for the fine adjustment.
BX3-SSU
(Fig. 2)
(Fig. 3)
(Fig. 4)
" (OFF) and
6