- ページ 9

医療機器 Olympus BX3-SSUのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Olympus BX3-SSU 20 ページ。 Scanning stage with ultrasonic
Olympus BX3-SSU にも：取扱説明書 (24 ページ)

OPERATION OF SCANNING STAGE WITH ULTRASONIC

When you use BX3-SSU for the first time, be sure to perform the Auto Compensation of the stage. For detail procedures,

refer to "Auto Compensation of the Stage" described in the previous page.

Fig. 2

Fig. 3

Fig. 4

} Ensure that the cables are connected correctly and securely.

Set the main switches to " I " (ON) in the following sequence.

1. Set the main switch @ of the BX3-CBH control box to " I " (ON).

2. Set the main switch 2 of the control box for BX3-SSU to " I " (ON).

Moving the Stage

1. Rotate the Y-axis knob 2 and X-axis knob @ to move the stage.

Factory setting: 10 mm displacement per turn for the coarse adjustment,

2. Press the coarse/fine selector button 3 to switch the knob functions

between the coarse and fine adjustment.

· Pushed in: Coarse adjustment.

· Out position: Fine adjustment.

} The tone occurred when operating the stage may vary drastically in some

cases, but it does not cause any problem for the product performance.

} The stage may be vibrated slightly in some cases when starting the stage,

but the product is not damaged.

Replacing the Fuses

1. Set the main switch of the control box for BX3-SSU to "

unplug the power cord connector from the power outlet.

2. Draw out the fuse box @ by inserting a flat object such as a tip of

screwdriver into the slit 2 on the top surface of the fuse box.

3. Replace both of the fuses in the fuse box with new ones.

<< Applicable fuses >>

T3.15A(H)250V (LITTELFUSE 2153.15)

CAUTION

Using a non-specified fuse may cause a fire hazard.

4. Place the fuse box in the original position.

0.2 mm displacement per turn for the fine adjustment.

BX3-SSU

(Fig. 2)

(Fig. 3)

(Fig. 4)

" (OFF) and