Axminster TS-200 Manual de instrucciones y lista de piezas - Página 7

Navegue en línea o descargue pdf Manual de instrucciones y lista de piezas para Sierra Axminster TS-200. Axminster TS-200 17 páginas. 200mm table saw

FIG 2

Installation & Assembly

Remove the table insert .

Block the spindle with current sawing tool; remove the flange (FIG 3)(FIG 4) (thoroughly clean when

reassembling)

Note the direction of the teeth when replacing the saw blade. Replace the various connection elements

(FIG 5)

Loosen the flange base with a 13 mm wrench and insert the splitting wedge. Adjust the splitting wedge and

be sure to maintain a distance of approx. 3mm to the saw blade (FIG 6). Securely fasten the splitting wedge

with screw. Check that the splitting wedge is parallel to the saw blade by means of the table insert (FIG 7).

Adjusting the Longitudinal Limit Stop

The longitudinal limit stop must be adjusted so that it is exactly parallel to the saw blade. First set the

FIG 4

FIG 6

FIG 3

FIG 7

FIG 5