Axminster SIEG G1 Engineer Series Manual del usuario - Página 12
Navegue en línea o descargue pdf Manual del usuario para Herramienta eléctrica Axminster SIEG G1 Engineer Series. Axminster SIEG G1 Engineer Series 16 páginas. Powered hacksaw
También para Axminster SIEG G1 Engineer Series: Manual del usuario (16 páginas)
Imprimir página
Routine Maintenance
WARNING! DISCONNECT YTHE
MACHINE FROM THE MAINS
SUPPLY.
Excessive dust in the motor can cause excessive
heat to develop. Every effort should be made to
prevent foreign material from entering the motor.
When operated under conditions likely to permit
accumulations of dust, dirt or waste, a visual
inspection should be made at frequent intervals.
Accumulations of dry dust can usually be blown out
successfully.
Caution: To avoid eye injury or adverse
reaction to dust, high pressure hoses should not
be used especially in poorly ventilated areas. The
operator performing this cleaning function should
wear safety goggles and dust filter mask.
Every 2 hours of use, apply a general purpose grease
to the arm slides via the grease nipples provided
with a high pressure grease gun.
If the machine is going to stand idle for any length of
time, a light coat of spray or machine oil over the vice,
bed and other non painted parts will prevent rusting.
Do not use the machine if the power cable has
become damaged. If any servicing (other than the
above cleaning) becomes necessary the unit should
be returned to your supplier or repaired by
a qualified technician.
12
Oil