Axminster SIEG G1 Engineer Series 사용자 설명서 - 페이지 12
{카테고리_이름} Axminster SIEG G1 Engineer Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster SIEG G1 Engineer Series 16 페이지. Powered hacksaw
Axminster SIEG G1 Engineer Series에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)
페이지 인쇄
Routine Maintenance
WARNING! DISCONNECT YTHE
MACHINE FROM THE MAINS
SUPPLY.
Excessive dust in the motor can cause excessive
heat to develop. Every effort should be made to
prevent foreign material from entering the motor.
When operated under conditions likely to permit
accumulations of dust, dirt or waste, a visual
inspection should be made at frequent intervals.
Accumulations of dry dust can usually be blown out
successfully.
Caution: To avoid eye injury or adverse
reaction to dust, high pressure hoses should not
be used especially in poorly ventilated areas. The
operator performing this cleaning function should
wear safety goggles and dust filter mask.
Every 2 hours of use, apply a general purpose grease
to the arm slides via the grease nipples provided
with a high pressure grease gun.
If the machine is going to stand idle for any length of
time, a light coat of spray or machine oil over the vice,
bed and other non painted parts will prevent rusting.
Do not use the machine if the power cable has
become damaged. If any servicing (other than the
above cleaning) becomes necessary the unit should
be returned to your supplier or repaired by
a qualified technician.
12
Oil