Axminster AHBGDL Hobby Series Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Amoladora Axminster AHBGDL Hobby Series. Axminster AHBGDL Hobby Series 16 páginas. Wide stone grinder

Imprimir página

Good Working Practices/Safety

The following suggestions will enable you to observe good working practices, keep yourself and

fellow workers safe and maintain your tools and equipment in good working order.

WARNING!!

Primary Precautions

These machine are supplied with a moulded 13 Amp. Plug and 3 core power cable. Before using

the machine inspect the cable and the plug to make sure that neither are damaged. If any

damage is visible have the machine inspected/repaired by a suitably qualified person. If it is

necessary to replace the plug, it is preferable to use an 'unbreakable' type that will resist

damage on site. Only use a 13 Amp plug, and make sure the cable clamp is tightened securely.

Fuse as required. If extension leads are to be used, carry out the same safety checks on them,

and ensure that they are correctly rated to safely supply the current that is required for your

machine.

If the machine is not fitted with a NvR type ON/OFF switch, always check that

the machine is OFF before connecting it to the mains supply.

Work Place/Environment

The machine is designed for indoor operation, do not use when or where it is liable to get wet.

If the machine is to be used outside and it starts to rain, stop work and move it inside. If the

machine has got wet; dry it off as soon as possible, with a cloth or paper towel. Do not use

230Va.c. powered machines anywhere within a site area that is flooded or puddled, and do not

trail extension cables across wet areas. Keep the machines clean; it will enable you to more

easily see any damage that may have occurred. Clean the machine with a damp soapy cloth if

needs be, do not use any solvents or cleaners, as these may cause damage to any plastic parts

or to the electrical components. Keep the work area as uncluttered as is practical, this includes

personnel as well as material.

Under no circumstances should CHILDREN be allowed in work areas.

WARNING!!

General Instructions for 230V Machines

KEEP TOOLS AND EQUIPMENT OUT

OF THE REACH OF YOUNG CHILDREN

Mains Powered Tools